HOME>Product Control > Pressure Controller
|Operating pressure range||0~0.9MPa|
|Pressure setting range||0.2~0.6MPa|
|Operating temp. range||0~60ºC (No freezing）|
|MM size (mm)||ø4, ø6, ø8, ø10, ø12|
|Inch size ||ø5/32, ø1/4, ø5/16, ø3/8, ø1/2 |
|Metric thread ||M5x0.8|
|Taper pipe thread||R1/8, R1/4, R3/8, R1/2|
|National pipe thread taper|| NPT1/8, NPT1/4, NPT3/8, NPT1/2|
Pressure control valve saves compressed air consumption.
- In driving a mechanism under high pressure, compressed air can be saved by use of the pressure controller to reduce the pressure only during home return.
- The pressure controller controls the pressure for advance and return of a mechanism.When a primary pressure is introduced from the thread side, a reduced pressure will come out from the joint side. If the primary pressure is introduced from the joint side, the same pressure will come out from the thread side because of the operation of the check valve.